Subscribe to Subscribers

Three Phase Thyristor (SCR) Power Controllers

These modular thyristor (SCR) power controllers can be configured easily via software for virtually any application. Fast fuses as well as voltage, current and power sensing are integrated into these assemblies. Feel free to contact us on 03 9720 4522 or sales@practicalcontrol.com.au to discuss your specific needs.

REVO-E 3PH (CD3000E)
25A to 600A

Brochure
Instruction Manual

Revo 3 Phase Thyristor (SCR) Power Conroller

cd automation logo
Thyristor (SCR) Power Controller REVO-E 3PH (CD3000E 3PH) 25A to 600A

Microprocessor controlled thyristors ideal for: most applications including Short Wave
Infrared (SWIR) & Inductive load types 3, 4 or 6 wire / 330V to 600VAC Supply, DC Logic,
4-20mA, 0-10V DC linear, 10K pot or RS485 Comms input / Burst Firing, Single Cycle,
Soft Start + Burst Firing, Delayed Triggering + Burst Firing, Phase Angle,
Soft Start + Phase Angle.
Listed below are 480V models, 600V models are also available.
Manufactured by CD Automation
Part No. Current Voltage (max) Order code
RE3025-42 25A 480V 0140480009
RE3035-42 35A 480V 0140480010
RE3045-42 45A 480V 0140480011
RE3075-42 75A 480V 0140480008
RE3100-42 100A 480V 0140480012
RE3125-42 125A 480V 0140480013
RE3150-42 150A 480V 0140480002
RE3225-42 225A 480V 0140480014
RE3300-42 300A 480V 0140480015
RE3350-42 350A 480V 0140480016
RE3400-42 400A 480V 0140480017
RE3450-42 450A 480V 0140480018
RE3500-42 500A 480V 0140480019
RE3600-42 600A 480V 0140480020
Multidrive 3PH (M3)
35A to 2700A

Brochure

M3 Multidrive 3 Phase Thryistor (SCR) Power Controller

cd automation logo
Thyristor (SCR) Power Controller Multidrive 3PH (M3) 35A to 2700A

Microprocessor based thyristor ideal for: most applications including Short Wave Infrared
(SWIR) & Inductive load types 3, 4 & 6 wire / 24Vac to 690Vac Supply / 4-20mA or 0-10V DC
linear inputs, 10K Pot or RS485 Comms input / Burst Firing, Single Cycle,
Soft Start + Burst Firing, Delayed Triggering + Burst Firing, Phase Angle,
Soft Start + Phase Angle.
Listed below are 480V models, 600V models are also available.
Manufactured by CD Automation
Part No. Current Voltage (max) Order code
M30850-42 850A 480V 0140480028
M31000-42 1000A 480V 0140480029
M31400-42 1400A 480V 0140480030
M31500-42 1500A 480V 0140480031
M31850-42 1850A 480V 0140480032
M32000-42 2000A 480V 0140480033
M32400-42 2400A 480V 0140480034
M32700-42 2700A 480V 0140480035
Display and Configuration unit for CD Automation Thyristor (SCR) Power Controllers

The CD-KP is a 48 x 96mm panel mount operator interface that allows operation & configuration of the thyristor
(SCR) power controller without the need to open the electrical enclosure or to stop the process.
Its functions
include:
  • Digital display of current, voltage & power
  • Display of control input signal
  • Retransmission of either output current, voltage or power with 4-20mA 0r 0-10V DC signal
  • Switch between Local /Remote operation of Thyristor (SCR) Power Controller
  • RS232 port to allow PC based configuration using freely downloadable configuration software
Order code (CD-KP for CD3000E 3PH, 115VAC power supply): 0140480003
Order code (CD-KP for CD3000E 3PH, 230VAC power supply): 0140480004
Order code (CD-KP for Multidrive M3, 115VAC power supply): 0140480074
Order code (CD-KP for Multidrive M3, 230VAC power supply): 0140480075
Thyristor (SCR) Power Controller REVO-S 3PH 30A to 210A

The REVO-S family of solid state relays / thyristor (scr) power controllers is designed to minimise installation cost, space and time. The REVO-S thyristor power controllers can be mounted side by side to minimise enclosure
space requirements and fuses, where specified, are integrated into the assembly. On analogue input models or on models with heater burnout alarm an optional flat cable connector system is available to further simplify
installation. The REVO-S 3PH thyristor (SCR) power controller can be used either as an on/off switch with a logic
input or as a burst controller with analogue input. The REVO-S 3PH power controller is suitable for nonvariable
resistance, longwave infrared and medium wave infrared.
Analogue input models are burst firing, SSR input models are zero cross on off.
Heater break alarm is available as an option. 0-10V DC analogue input is also available.
The REVO-S can also be supplied as a 600V switch.
Manufactured by CD Automation
Part No. Current Voltage (max) Control signal Order code
RS3030-40SZ0F002 30A 480V SSR 7-30V DC 0140480106
RS3030-44A40F002 30A 480V 4-20mA 0140480107
RS3035-40SZ0F002 35A 480V SSR 7-30V DC 0140480108
RS3035-44A40F002 35A 480V 4-20mA 0140480109
RS3040-40SZ0F002 40A 480V SSR 7-30V DC 0140480110
RS3040-44A40F002 40A 480V 4-20mA 0140480111
RS3060-40SZ0F002 60A 480V SSR 7-30V DC 0140480112
RS3060-44A40F002 60A 480V 4-20mA 0140480113
RS3090-40SZ0F202 90A 480V SSR 7-30V DC 0140480114
RS3090-44A40F202 90A 480V 4-20mA 0140480115
RS3120-40SZ0F202 120A 480V SSR 7-30V DC 0140480116
RS3120-44A40F202 120A 480V 4-20mA 0140480117
RS3150-40SZ0F202 150A 480V SSR 7-30V DC 0140480118
RS3150-44A40F202 150A 480V 4-20mA 0140480119
RS3180-40SZ0F202 180A 480V SSR 7-30V DC 0140480120
RS3180-44A40F202 180A 480V 4-20mA 0140480121
RS3210-40SZ0F202 210A 480V SSR 7-30V DC 0140480122
RS3210-44A40F202 210A 480V 4-20mA 0140480123
Thyristor (SCR) Power Controller REVO-M 3PH 30A to 500A

The REVO-M family of thyristor (scr) power controllers combine zero cross burst control with the flexibility of
microprocessor based indication and adjustment.
The dual front panel LED display allows configuration of the unit as well as indication of current, voltage, power and
other parameters.
All REVO-M thyristors have RS485/Modbus communications as standard. The unit's Modbus communications port
can be used to set power output, read output voltage, current and power and read and reset alarm status.
Control input is universal and can be configured as SSR, 4-20mA, 0-10V, potentiometer and RS485.
The REVO-M can also be supplied in a 600V version.
Manufactured by CD Automation
Part No. Current Voltage (max) Control signal Order code
RM3040-42A 40A 480V 4-20mA 0140480172
RM3060-42A 60A 480V 4-20mA 0140480173
RM3090-42A 90A 480V 4-20mA 0140480174
RM3120-42A 120A 480V 4-20mA 0140480175
RM3150-42A 150A 480V 4-20mA 0140480176
RM3180-42A 180A 480V 4-20mA 0140480177
RM3210-42A 210A 480V 4-20mA 0140480178
RM3225-42A 225A 480V 4-20mA 0140480179
RM3300-42A 300A 480V 4-20mA 0140480180
RM3350-42A 350A 480V 4-20mA 0140480181
RM3400-42A 400A 480V 4-20mA 0140480182
RM3450-42A 450A 480V 4-20mA 0140480183
RM3500-42A 500A 480V 4-20mA 0140480184
Custom 3PH Thyristor
150A to 800A

Brochure

Custom-3PH Thyristor (SCR)Power Controller

cd automation logo
Custom 3PH 150A to 800A Thyristor (SCR) Power Controller

The Custom-3PH thyristor (SCR) power controller can be used either as an on/off switch with a logic input or as a burst controller with analogue input. The Custom-3PH power controller is suitable for nonvariable resistance,
longwave infrared and medium wave infrared.
Analogue input models are burst firing, SSR input models are zero cross on off. Internal fast fuses are supplied
standard. Heater break alarm is available as an option. 0-10V DC analogue input is also available.
Manufactured by CD Automation
Part No. Current Voltage (max) Control signal Order code
C30150-42SZ0F202 150A 480V SSR 4-30V DC 0140480098
C30150-42A80F202 150A 480V 4-20mA 0140480099
C10300-42SZ0F202 300A 480V SSR 4-30V DC 0140480100
C10300-42A80F202 300A 480V 4-20mA 0140480101
C30550-42SZ0F202 550A 480V SSR 4-30V DC 0140480102
C30550-42A80F202 550A 480V 4-20mA 0140480103
C30800-42SZ0F202 800A 480V SSR 4-30V DC 0140480104
C30800-42A80F202 800A 480V 4-20mA 0140480105