Subscribe to Subscribers

Two Phase Thyristor (SCR) Power Controllers

Two phase thyristor (SCR) power controllers provide an economic means of switching delta or floating star (no neutral connection) heating loads that are suitable for burst or on/off SSR control. In addition to lower cost two phase switching generates less heat in the panel compared to three phase switching. These two phase modular thyristor (SCR) power controllers can be configured easily via software for virtually any application. Fast fuses as well as voltage, curent and power sensing are integrated into these assemblies. Feel free to contact us on 03 9720 4522 or sales@practicalcontrol.com.au to discuss your specific needs.

REVO-E 2PH (CD3000E)
35A to 700A

Brochure
Instruction Manual

Revo 2 Phase Thyristor (SCR) Power Conroller

cd automation logo
Thyristor (SCR) Power Controller REVO-E 2PH (CD3000E 2PH) 35A to 700A

Microprocessor based thyristor ideal for most applications including Short Wave Infrared (SWIR) & Inductive
load types floating star or delta/ from 24VAC to 600VAC Supply / 4-20mA or 0-10V DC linear inputs, 10K Pot
or RS485 Comms input / Burst Firing, Single Cycle, Delayed Triggering + Burst Firing
Listed below are 480V models, 600V models are also available.
Manufactured by CD Automation
Part No. Current Voltage (max) Order code
RE2035-42 35A 480V 0140480052
RE2045-42 45A 480V 0140480053
RE2075-42 75A 480V 0140480054
RE2100-42 100A 480V 0140480055
RE2125-42 125A 480V 0140480056
RE2150-42 150A 480V 0140480057
RE2225-42 225A 480V 0140480058
RE2280-42 300A 480V 0140480059
RE2400-42 400A 480V 0140480060
RE2450-42 450A 480V 0140480061
RE2500-42 500A 480V 0140480062
RE2600-42 600A 480V 0140480063
RE2700-42 700A 480V 0140480064
Multidrive 2PH (M2)
35A to 2700A

Brochure

M2 Multidrive 2 Phase Thryistor (SCR) Power Controller

cd automation logo
Thyristor (SCR) Power Controller Multidrive 2PH (M2) 35A to 2700A

Microprocessor based thyristor ideal for most applications including Short Wave Infrared (SWIR) & Inductive
load types floating star or delta/ 24Vac to 690Vac Supply / 4-20mA or 0-10V DC linear inputs 10K Pot
or RS485 Comms input / Burst Firing, Single Cycle, Delayed Triggering + Burst Firing
Listed below are 480V models, 600V & 690V models are also available.

Manufactured by CD Automation
Part No. Current Voltage (max) Order code
M20850-42 850A 480V 0140480065
M21000-42 1000A 480V 0140480066
M21400-42 1400A 480V 0140480067
M21500-42 1500A 480V 0140480068
M21850-42 1850A 480V 0140480069
M22000-42 2000A 480V 0140480070
M22400-42 2400A 480V 0140480071
M22700-42 2700A 480V 0140480072
Display and Congiguration unit for CD Automation Thyristor (SCR) Power Controllers

The CD-KP is a 48 x 96mm panel mount operator interface that allows operation & configuration of the thyristor
(SCR) power controller without the need to open the electrical enclosure or to stop the process. Its functions
include:
  • Digital display of current, voltage & power
  • Display of control input signal
  • Retransmission of either output current, voltage or power with 4-20mA 0r 0-10V DC signal
  • Switch between Local /Remote operation of Thyristor (SCR) Power Controller
  • RS232 port to allow PC based configuration using freely downloadable configuration software
Order code (CD-KP for CD3000E 2PH, 115VAC power supply): 0140480076
Order code (CD-KP for CD3000E 2PH, 230VAC power supply): 0140480077
Order code (CD-KP for Multidrive M2, 115VAC power supply): 0140480078
Order code (CD-KP for Multidrive M2, 230VAC power supply): 0140480079
Thyristor (SCR) Power Controller REVO-S 2PH 30A to 210A

The REVO-S family of solid state relays / thyristor (scr) power controllers is designed to minimise installation cost, space and time. The REVO-S thyristor power controllers can be mounted side by side to minimise enclosure
space requirements and fuses, where specified, are integrated into the assembly. On analogue input models or on models with heater burnout alarm an optional flat cable connecter system is available to further simplify
installation. The REVO-S 2PH thyristor (SCR) power controller can be used either as an on/off switch with a logic
input or as a burst controller with analogue input. The REVO-S 2PH power controller is suitable for nonvariable
resistance, longwave infrared and medium wave infrared.
Analogue input models are burst firing, SSR input models are zero cross on off.
Heater break alarm is available as an option. 0-10V DC analogue input is also available.
The REVO-S can also be supplied as a 600V switch.

Manufactured by CD Automation
Part No. Current Voltage (max) Control signal Order code
RS2030-40SZ0F002 30A 480V SSR 7-30V DC 0140480124
RS2030-44A40F002 30A 480V 4-20mA 0140480125
RS2035-40SZ0F002 35A 480V SSR 7-30V DC 0140480126
RS2035-44A40F002 35A 480V 4-20mA 0140480127
RS2040-40SZ0F002 40A 480V SSR 7-30V DC 0140480128
RS2040-44A40F002 40A 480V 4-20mA 0140480129
RS2060-40SZ0F002 60A 480V SSR 7-30V DC 0140480130
RS2060-44A40F002 60A 480V 4-20mA 0140480131
RS2090-40SZ0F202 90A 480V SSR 7-30V DC 0140480132
RS2090-44A40F202 90A 480V 4-20mA 0140480133
RS2120-40SZ0F202 120A 480V SSR 7-30V DC 0140480134
RS2120-44A40F202 120A 480V 4-20mA 0140480135
RS2150-40SZ0F202 150A 480V SSR 7-30V DC 0140480136
RS2150-44A40F202 150A 480V 4-20mA 0140480137
RS2180-40SZ0F202 180A 480V SSR 7-30V DC 0140480138
RS2180-44A40F202 180A 480V 4-20mA 0140480139
RS2210-40SZ0F202 210A 480V SSR 7-30V DC 0140480140
RS2210-44A40F202 210A 480V 4-20mA 0140480141
Thyristor (SCR) Power Controller REVO-M 2PH 30A to 700A

The REVO-M family of thyristor (scr) power controllers combine zero cross burst control with the flexibility of
microprocessor based indication and adjustment.
The dual front panel LED display allows configuration of the unit as well as indication of current, voltage, power and
other parameters.
All REVO-M thyristors have RS485/Modbus communications as standard. The unit's Modbus communications port
can be used to set power output, read output voltage, current and power and read and reset alarm status.
Control input is universal and can be configured as SSR, 4-20mA, 0-10V, potentiometer and RS485.
The REVO-M can also be supplied in a 600V version.
Manufactured by CD Automation
Part No. Current Voltage (max) Control signal Order code
RM2040-42A 40A 480V 4-20mA 0140480185
RM2060-42A 60A 480V 4-20mA 0140480186
RM2090-42A 90A 480V 4-20mA 0140480187
RM2120-42A 120A 480V 4-20mA 0140480188
RM2150-42A 150A 480V 4-20mA 0140480189
RM2180-42A 180A 480V 4-20mA 0140480190
RM2210-42A 210A 480V 4-20mA 0140480191
RM2280-42A 280A 480V 4-20mA 0140480192
RM2400-42A 400A 480V 4-20mA 0140480193
RM2450-42A 450A 480V 4-20mA 0140480194
RM2500-42A 500A 480V 4-20mA 0140480195
RM2600-42A 600A 480V 4-20mA 0140480196
RM2700-42A 700A 480V 4-20mA 0140480197
Custom 2PH
150A to 800A

Brochure

Custom-2PH Thyristor (SCR)Power Conroller

cd automation logo
Custom 2PH Thyristor (SCR) Power Controller 150A to 800A

The Custom-2PH thyristor (SCR) power controller can be used either as an on/off switch with a logic input or as a burst controller with analogue input. The Custom-2PH power controller is suitable for nonvariable resistance,
longwave infrared and medium wave infrared.
Analogue input models are burst firing, SSR input models are zero cross on off. Internal fast fuses are supplied
standard. Heater break alarm is available as an option. 0-10V DC analogue input is also available.

Manufactured by CD Automation
Part No. Current Voltage (max) Control signal Order code
C20150-42SZ0F202 150A 480V SSR 4-30V DC 0140480086
C20150-42A80F202 150A 480V 4-20mA 0140480087
C20210-42SZ0F202 210A 480V SSR 4-30V DC 0140480088
C20210-42A80F202 210A 480V 4-20mA 0140480089
C20300-42SZ0F202 300A 480V SSR 4-30V DC 0140480090
C20300-42A80F202 300A 480V 4-20mA 0140480091
C20450-42SZ0F202 450A 480V SSR 4-30V DC 0140480092
C20450-42A80F202 450A 480V 4-20mA 0140480093
C20550-42SZ0F202 550A 480V SSR 4-30V DC 0140480094
C20550-42A80F202 550A 480V 4-20mA 0140480095
C20800-42SZ0F202 800A 480V SSR 4-30V DC 0140480096
C20800-42A80F202 800A 480V 4-20mA 0140480097